My Cart

Close

INSTALLATION INFO

INSTALLATION GUIDES:

» Download the Banister to Banister Installation Guide
» Download the Banister to Wall Installation Guide

INSTALLATION VIDEOS:

Our Banister to Banister gates install in minutes without tools. In the video below, you will see how easy it is to install our baby gate to your banisters by simply clipping them in place and pulling the polypropylene webbing snug.

 Our Wall to Banister stair gates requires minimal drilling on the wall side of your staircase. The video below explains where to position the wall side brackets and how to install our Wall to Banister gate.

 

COMMON INSTALLATION QUESTIONS:

Q. What tools are required to install a Stair Barrier?

A. Banister to Banister Stair Barriers do not require tools or drilling for installation. Wall to Banister gates require the following tools: hammer, screw driver, stud finder and a level.

Q. Do I need to purchase additional installation kits for the Wall to Banister gate?

A. No. The installation kit is included with the gate and includes the following: 8 screws, 8 anchors, 2 spacers (spacers are used if you have molding on the bottom of the wall side), 2 brackets and a rod. The brackets and rod are black.

 INSTALLATION TIPS: 

With the many variations in stairs, there is not one process for installation that applies to all homes. With the Stair Barrier you can use the banisters, spindles, multiple spindles and combination of both to install the product. The key is to try multiple options and find the tightest fit that works for your stairs.

INSTALLATION EXAMPLES
Attached to Both Banisters (Left) / Attached to Multiple Spindles (Right):
 
Wall to Banister (Left) / Wall to Multiple Spindles Behind Banister (Right)